The machine is combined by the following parts and components: hydraulic brick machine, material feeder, hydraulic system, electrical system, brick receiver and brick stacker.
(1)The machine is combined by the following parts and components: forming machine, material feeder, hydraulic system, electrical system, block receiver and block stacker.
(2)Programmable controlled, mechanical, electrical and hydraulic pressure system
(3)Double sides hydraulic pressure system
(4)Noiseless, high pressure, non-pallet
(5)High production efficiency, low labour intensity
(6)Green, energy-saving and sustainable
(7)Applied to produce varies sizes and types of concrete block and bricks by replacing molds with corresponding specifications. Wide range materials can be used for making new energy-saving building materials, such as sand, stone powder, steel slag, fly ash and other industrial wastes.
The advantage of hydraulic brick machine
1. To design more advanced
Our brick machine is the digestion and absorption of advanced German import equipment technology, and adopts up-to-down pressure mode. On the design of the oil cylinder, a bigger improvement, increase the size of the oil cylinder, improve the whole pressure equipment.
2. Device configuration is higher
Hydraulic system including pump, proportional direction valve, proportional pressure valve, all choose Germany rexroth company; Displacement sensor to choose United States company; Control system adopts the Siemens S7-300 series programmable controller.
3. A diversity of products
By preloading, molding pressure, pressure maintaining three links, which can effectively eliminate gas of raw materials, finished brick increase compactness.
Mould replacement, can not only produce the tail ore standard brick, lime-sand standard bricks, blind hole brick, also can produce hollow brick road brick, square brick, a variety of specifications.
4. Product percent of pass is high
Oil cylinder built-in displacement sensor, which can accurately control the brick packing, product qualified rate is high, the product of error is ± 1 mm only, hydraulic station built-in pressure sensor, to ensure the strength of the brick to reach more than 15 Mpa, and may be adjusted according to different materials.
|
No. |
Name |
Specification |
|
1 |
Brick press |
JYM-650 |
|
2 |
Max pressure (KN) |
6500 |
|
3 |
Preload pressure (KN) |
1005 |
|
4 |
Molding cycle (s) |
13-18 |
|
5 |
Finished products specification |
240*115*53mm |
|
6 |
brick per cycle (piece) |
24 |
|
7 |
Total power (kw) |
86.5 |
|
8 |
Capacity (pcs/ yearly) |
30 million |
|
9 |
Weight (ton) |
25 |
|
10 |
Overall dimension (mm) |
3765×2040×5130 |
JYM series full automatic hydraulic press machine is a new type of fully automatic brick making equipment with energy saving and high efficiency developed by our company on the basis of digesting and absorbing foreign advanced hydraulic press machine technology.b_sub
JYM-1280 automatic hydraulic brick making machine is a new type hydraulic and autoclaved brick making plant we newly push which adopt international advanced brick making technology, under domestic brick making operate level and specific condition of different materials.b_sub
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.